Combining two complementary removable media technologies (LTO® and RDX®), the Imation LR1100 LTO/RDX 1U storage enclosure gives SMBs unprecedented flexibility to simultaneously manage rapid, unpredictable growth in digital content while still meeting strict industry regulations for retention, retrieval and recovery, and relaying of data.
The Imation LR1100 LTO/RDX enclosure features two drive bays that can hold one or two half-height LTO tape drives, one or two RDX removable hard disk drives—or one of each—all in 1U of 19-inch rack space. This enables SMBs to dynamically adjust their storage device mix to meet evolving data needs. Need more backup capacity? Just add another RDX drive. When archive demands increase, it takes only moments to install a second LTO-5 HH tape drive. The enclosure also features high-speed SAS and USB interface options, making it an easy fit in any data center.
Affordable, easy to use and energy efficient, the Imation LR1100 LTO/RDX 1U Storage Enclosure helps SMBs reduce content storage costs, ensure regulatory compliance and safeguard their valuable data. With Imation, your information works harder and rests easier.
Efficient Use of Space
Maximize capacity, minimize space: low-profile design holds up to two storage devices, mounted in 1U space in a 19-inch rack
Multiple Drive Options
Optimize data storage: deploy half-height LTO-5 or LTO-4 tape drives, or RDX removable disk drives, depending on storage requirements
Seamlessly grow capacity: simply add more LTO-5 HH or LTO-4 HH tape cartridges or RDX disk cartridges as data demands increase
Install anywhere: high-speed Serial Attached SCSI (SAS) and USB interfaces offer compatibility with a broad range of server systems
Save money and time: consolidation of devices cuts costs by enabling smaller footprint, lower power consumption
Imation LR1100 LTO/RDX 1U Storage Enclosure
Number of storage devices
Optional, SAS or USB 3.0
2:1 for tape drives; compression on RDX disk drives varies with type of data written to disk
140 watt power supply; 0.047 kVA
5.5 bels @ idle; 6.2 bels operating
7.1kg(15.6lbs) in typical configuration
4.3 cm H x 48 cm W x 43.8 cm D
(1.7 in x 18.7 in x 17.6 in)
Wet bulb (Max)