IMPORTANT: Please read and print out these directions before proceeding with updates to your FlashGO! 2.0 (FG2) flash card reader.

File contents of this folder:

FG2_98DRV_V155I.EXE  - Driver installer for Windows 98 & ME

FG2_98DRV_V155U.EXE  - Driver un-installer for Windows 98 & ME

NOTE: Windows XP does not require a driver or uninstaller.

=================================================================================================
Driver installation procedure.

1) If a driver has been previously installed uninstall it first.

2) Install the driver before attaching the unit to your PC

3) Double click on the driver program, and the driver will install, Click OK to end the install.

4) Attach the device to a USB 2.0 port for maximum performance, or to a USB 1.1 port to begin using your FlashGO! 2.0 multi card reader.

5) Four icons will appear in My Computer or Windows Explore. They are labeled CF, SM, SD, and MS. The icon drive letters will always be in this order. CF for Compact Flash, SM for Smart Media, SD for Secure Digital, and MMC cards, and MS for MemoryStick. They will typically appear as your E:, F:, G:, and H: drives. 

==================================================================================================

Driver uninstall procedure.

1) Select the correct uninstaller for your system.

2) Remove the FG2 unit from the USB port.

3) Launch the uninstaller, and click 'Yes' to confirm that you really want to remove the driver.

4) If you don't want to remove the driver press 'No' now.

5) Click OK to acknowledge that the driver has been removed. It may take a few seconds for this message to appear.

==================================================================================================


Windows 98